Solve: DPC WATCHDOG VIOLATION Stop Code Error Windows 10

Windows 10 is undoubtedly one of the best operating systems for computers to date. It is full of features and delivers optimal performance and user experience. However, each good thing comes with some pitfalls, and the same goes for Windows 10. Sometimes, you may encounter strange error codes while using your device. One such error is the DPC WATCHDOG VIOLATION Error.

If you are going through this problem, then stay on this page, and we’ll show you how to fix it within mere minutes.

So what are you waiting for? Let’s jump in.

What is DPC WATCHDOG VIOLATION?

When there are some technical problems with the hardware and software of your PC, this error message may appear on your screen, and it indicates that your computer’s operating system can’t connect to specific hardware. The term DPC stands for deferred procedure call, and it is a system process on Windows 10.

This system process allows your computer software to communicate with your CPU and other hardware. When this process doesn’t work correctly, it may cause the DPC Watchdog violation. That’s all that can be said about it. The main thing is how to resolve it when it appears.

Causes of DPC WATCHDOG VIOLATION

In most cases, some unknown system hardware problems can trigger this problem. This error appears when your computer’s software cannot communicate to your PC’s physical components properly. When the operating system was launched way back in 2015, there were several DPC WATCHDOG VIOLATION error messages due to the incompatibility of SSDs. Therefore the reason behind this error might be corrupted, outdated, or missing essential device drivers.

Fix 1: Checking and Configuring the Hardware

As we discussed, this problem appears when there are hardware failures or technical issues, so checking it may help. You need to make sure all cables are plugged in well in their place. Also, make sure RAM is correctly fitted into the slot. Other components, such as the hard drive, SSD, should be appropriately connected to your computer. If you see any part of your device out of place, make sure to configure it correctly. If you have doubts on any of your computer components, make sure to fix them first to troubleshoot the problem.

If there is no problem with the hardware, you can move on to the next fix troubleshooting tip.

Fix 2: Clean Your Laptop or Desktop

If your computer or laptop is too old or you haven’t serviced it for a long time, it could cause hardware connectivity. Too much dust and debris in your computer’s internal components can cause them to disconnect from your device or work incorrectly. Therefore it’s worth cleaning your computer if you want to fix this error. You can use a blower to blow away all the dust from the device. Whether you have a desktop or laptop, you can clean it with a blower. While cleaning the PC, please remove the RAM, hard disk, cables, and other essential cords from your computer. Clean their connectivity plugs and pins carefully so that they can be connected properly. Once you have cleaned it and fixed all things back, you can start the computer and see if the error is gone or not.

Fix 3: Run SFC Scan

System file checker, also known as SFC, is a built-in utility in Windows 10 that can identify system file failures and issues. It will fix all files that handle your computer’s hardware and might solve the DPC WATCHDOG VIOLATION error messages as well.

 All you have to do is start it and once it completes, restart your device.

 If you don’t know how to run sfc scan on your Windows 10, then do follow the steps given here:

1. On your computer, launch the start menu by pressing the Windows key on your keyboard.
2. Now type in the command prompt.
3. Right-click on the command prompt icon and then select Run as administrator option.
4. Once the command prompt appears on the screen, provided with the command sfc /scannow and then press the enter button on your keyboard.
5. It will take a while to complete, and once that happens, restart your computer.
6. Finally, see if you can use the computer normally without any problem.

Fix 4: CHECK AND UPDATE SSD DRIVER

This problem occurs when your computer operating system cannot communicate with your computer’s solid-state drive. If you have an SSD in your laptop or CPU, then you should follow these steps:

1. open the settings on your computer by pressing Windows + I keys.
2. Click on update and security tile.
3. Click on Windows update and then go to view update history.
4. If possible, force your computer to download the latest update.
5. After that, open the start menu and put in “device manager.”
6. Select the most relevant result.
7. Open the disc drives section in the device manager.
8. Carefully identify your SSD in the listed devices.
9. Right, click on it.
10. Pick the update driver option.
11. Navigate to “Search automatically for updated driver software.”
12. Let it find the best driver for your PC and install it.

Once the process completes, restart your device. Now you will notice that you have fixed the DPC WATCHDOG VIOLATION error successfully.

We hope you have found this guide helpful and relevant. Thank you for coming here.

Source:-  Solve: DPC WATCHDOG VIOLATION Stop Code Error Windows 10

 

Want to Enable Dark Mode on Your Windows 10 Computer? Here’s How to Do It.

Dark Mode has now become a common feature that you can find in almost all the applications and devices. It is a great feature that helps the users to reduce eye strain, and it also gives a sleek look to your devices. Along with this, it also saves the battery on your devices. In today’s time, we all spend plenty of our time using our devices for different purposes. And somehow, it affects our health badly and especially our eyes. So, in this case, it becomes quite essential to enable the Dark Mode on our devices. Enabling this feature on smartphones follows a different procedure as compared to doing it on the computer systems. And not all operating systems support this functionality. But, if you use the Windows 10 operating system on your computer, then luckily, you can activate this feature.

Windows 10 has always been one of the most popular and commonly used operating systems among its users. The main reason for its popularity is the features that it provides to its users. And if you are also one of its users and are here to know the procedures for enabling the dark theme on your Windows 10 computer, then luckily, you are on the right spot now. Here, in our following article, we have mentioned the techniques that you will need to follow to enable the feature. So, to know more in this regard, please keep reading the article.

Enabling the Dark Mode on Windows 10 Computer

There are a lot of Windows 10 users who do not know the methods to enable the Dark Mode on their computer. The Dark Mode is a setting that turns the bright white screen of your device a little dark so that it’s easier to work with them. When you enable this setting, most of the apps and features on your device will have a white text with a black or grey background. Activating this feature on your Windows 10 computer is not any complicated task to accomplish. It follows a much easier way to do so. To provide you with a better understanding of the method, we have mentioned the procedure step-by-step. And to enable the Dark Mode theme on your Windows 10 computer system, you must go through the following steps. The whole process will not take much of your time.

So, if you want to enable this setting on your Windows 10 computer, please take a look at the below-mentioned steps:

Steps to Turn on the Dark Mode on Windows 10

Here are the steps to enable the Dark Mode on Windows 10 computer:

• To start enabling the setting, first of all, you will need to click on the “Start” button on your computer. And then select the option of “Settings”.
• On the Settings screen, select the “Personalisation” option.
• Now, go to the left pane and click on “Colours”. Here, you will find two Dark Mode settings to enable. You can choose any of them as per your choice.
• After reaching the “Choose your default app mode” section, you will need to select the option of “Dark”. After this, the Dark Mode will be enabled for many basic settings.
• And now, go to “Choose your default app mode” screen and click on “Dark”. This will automatically activate the Dark Mode in many apps.

Steps to Turn on the Dark Mode for any Specific App on Windows 10 Computer

If you have turned on the Dark Mode on your computer, but find that some apps don’t turn dark, then you can enable the setting for any specific app. Here’s how this works:

• For instance, if you want to turn on the Dark Mode in Microsoft Office apps, open any app like Word, Excel, or Powerpoint.
• And then, go to the “File” tab and click on “Options”.
• There, in the “General” tab, click on the section “Personalise your copy of Microsoft Office”.
• Go to the drop-down menu and select the “Office Theme” option.
• After this, you will be provided with two options, including “Dark Grey” and “Black”. Click on any of the options.
• Save the settings by clicking on the option of “Ok”. And that’s all.

So, this way, you can activate the Dark Mode on your Windows 10 computer. Take some time and try these procedures to personalize your experience. And to stay updated, please visit our website.

Source:- Enable Dark Mode on Your Windows 10