Solve: DPC WATCHDOG VIOLATION Stop Code Error Windows 10

Windows 10 is undoubtedly one of the best operating systems for computers to date. It is full of features and delivers optimal performance and user experience. However, each good thing comes with some pitfalls, and the same goes for Windows 10. Sometimes, you may encounter strange error codes while using your device. One such error is the DPC WATCHDOG VIOLATION Error.

If you are going through this problem, then stay on this page, and we’ll show you how to fix it within mere minutes.

So what are you waiting for? Let’s jump in.

What is DPC WATCHDOG VIOLATION?

When there are some technical problems with the hardware and software of your PC, this error message may appear on your screen, and it indicates that your computer’s operating system can’t connect to specific hardware. The term DPC stands for deferred procedure call, and it is a system process on Windows 10.

This system process allows your computer software to communicate with your CPU and other hardware. When this process doesn’t work correctly, it may cause the DPC Watchdog violation. That’s all that can be said about it. The main thing is how to resolve it when it appears.

Causes of DPC WATCHDOG VIOLATION

In most cases, some unknown system hardware problems can trigger this problem. This error appears when your computer’s software cannot communicate to your PC’s physical components properly. When the operating system was launched way back in 2015, there were several DPC WATCHDOG VIOLATION error messages due to the incompatibility of SSDs. Therefore the reason behind this error might be corrupted, outdated, or missing essential device drivers.

Fix 1: Checking and Configuring the Hardware

As we discussed, this problem appears when there are hardware failures or technical issues, so checking it may help. You need to make sure all cables are plugged in well in their place. Also, make sure RAM is correctly fitted into the slot. Other components, such as the hard drive, SSD, should be appropriately connected to your computer. If you see any part of your device out of place, make sure to configure it correctly. If you have doubts on any of your computer components, make sure to fix them first to troubleshoot the problem.

If there is no problem with the hardware, you can move on to the next fix troubleshooting tip.

Fix 2: Clean Your Laptop or Desktop

If your computer or laptop is too old or you haven’t serviced it for a long time, it could cause hardware connectivity. Too much dust and debris in your computer’s internal components can cause them to disconnect from your device or work incorrectly. Therefore it’s worth cleaning your computer if you want to fix this error. You can use a blower to blow away all the dust from the device. Whether you have a desktop or laptop, you can clean it with a blower. While cleaning the PC, please remove the RAM, hard disk, cables, and other essential cords from your computer. Clean their connectivity plugs and pins carefully so that they can be connected properly. Once you have cleaned it and fixed all things back, you can start the computer and see if the error is gone or not.

Fix 3: Run SFC Scan

System file checker, also known as SFC, is a built-in utility in Windows 10 that can identify system file failures and issues. It will fix all files that handle your computer’s hardware and might solve the DPC WATCHDOG VIOLATION error messages as well.

 All you have to do is start it and once it completes, restart your device.

 If you don’t know how to run sfc scan on your Windows 10, then do follow the steps given here:

1. On your computer, launch the start menu by pressing the Windows key on your keyboard.
2. Now type in the command prompt.
3. Right-click on the command prompt icon and then select Run as administrator option.
4. Once the command prompt appears on the screen, provided with the command sfc /scannow and then press the enter button on your keyboard.
5. It will take a while to complete, and once that happens, restart your computer.
6. Finally, see if you can use the computer normally without any problem.

Fix 4: CHECK AND UPDATE SSD DRIVER

This problem occurs when your computer operating system cannot communicate with your computer’s solid-state drive. If you have an SSD in your laptop or CPU, then you should follow these steps:

1. open the settings on your computer by pressing Windows + I keys.
2. Click on update and security tile.
3. Click on Windows update and then go to view update history.
4. If possible, force your computer to download the latest update.
5. After that, open the start menu and put in “device manager.”
6. Select the most relevant result.
7. Open the disc drives section in the device manager.
8. Carefully identify your SSD in the listed devices.
9. Right, click on it.
10. Pick the update driver option.
11. Navigate to “Search automatically for updated driver software.”
12. Let it find the best driver for your PC and install it.

Once the process completes, restart your device. Now you will notice that you have fixed the DPC WATCHDOG VIOLATION error successfully.

We hope you have found this guide helpful and relevant. Thank you for coming here.

Source:-  Solve: DPC WATCHDOG VIOLATION Stop Code Error Windows 10

 

What Does System Restore Do in Windows 10

System Restore is the most useful tool for the times when installing new programs or making changes to Windows causes unforeseen issues or problems. And when such problems arise, returning your Windows PC to an earlier point in time seems like the only option.  Windows System Restore offers some useful features for uninstalling a rogue program, recovering corrupt or damaged Windows installations, or to boot up your PC in case of corrupted drivers. It is always a good idea to create several systems restore points from time to time or maybe daily.

So in this article, we will discuss what does System Restore does, how long does it take for this activity to complete, can it delete your data on the PC, and what if the System Restore itself goes wrong. Keep reading to know it all.

What Does a System Restore Do?

System Restore is a built-in Windows utility application that allows you to create a snapshot of your Windows system files and installed applications at a specific point, known as a restore point. These restore points are stored in your computer’s hard drive so that they can be used by your PC if anything happens to your PC.

To access this option in Windows 10, go to the Start menu and click “Create a Restore point.” A pop-up window will appear there, click on the relevant icon to enable System Restore. The Windows system restore creates several Restore points from time to time, which are arranged neatly date-wise, making it super easy for you to select the required event for restoration.

How Long Does the System Restore Take?

System Restore can take variable amounts of time depending on the number of files on your system and how complex is the program that is being deleted. If you are using a restore point from a few days back, then the whole process of restoration should be completed within 25 to 40 minutes.

Also, keep in mind that the activity cannot be interrupted midway after initiating it. In case you get stuck, you will have to force reboot the system using the Power button. Once the system restarts, the following message will appear on your screen: “Please wait while your Windows files and settings are being restored, System Restore is initializing.” If the activity is consuming too much time, it is probably because there are too many files to fix.

Does System Restore Delete Files?

System Restore does not have any impact on any documents, pictures, videos, batch files, or other personal data stored on hard disks. It will only restore your system files and settings. The main aim of System restore is to repair the Windows environment by reverting to the previous configuration that was saved in the restore point, so the recently installed programs and drivers might get uninstalled. You can always review the programs that will be affected in the System Restore option. Also, if you updated your Windows version after the Restore Point you are using, then know that your system will go back to a previous version.

What If There’s Something Wrong with System Restore

You will get an error screen the restart upon System restore if there were any issues with the Restore point. You can solve this problem only through Safe mode by starting Advanced recovery. To do so, go to “Start > Change Advanced Startup Options > Advanced Startup > Restart Now.” A blue screen will appear, where you will find the option for System Restore in Safe mode.

System Restore is a frequently-used and trusted tool to go back to a  certain point where your PC or laptop was in the most appropriate health state. Also, this is a perfect way to get rid of any unknown problem that is affecting your system.

Source:-  What Does System Restore Do in Windows 10

 

Want to Enable the Touch Screen in Windows 10? Here’s How to Do It.

The touch screen is a great feature that enables you to use your fingers to interact with your device. And we all are pretty familiar with this option as we all use touch screen devices like smartphones and tablets. But, you know, you can enable this feature on your laptops also. If you use a laptop that supports this functionality, then you can easily activate and use the touch screen mode on it. Today, most operating systems are designed to work well with touch screen devices, and Windows 10 and Windows 8 are one of those operating systems. Enabling the touch screen mode on your Windows 10 laptop will ease your work and provide you with the best computing experience. However, many users do not know how to enable this functionality.

If you are one of them, then now, there is no need to look anywhere. Anyone can enable the touch screen mode on their Windows 10 laptop. Here, this article will let you know the procedure through which you can activate and use the touch screen mode on your Windows 10 laptop. If you want to get the technique, you will need to read the complete article.

The Procedure for Enabling the Touch Screen Mode on Windows 10 Laptop

If you use a laptop with inbuilt touch screen functionality, then the feature is enabled and turned on by default. But, in case, if it is turned off, then you can quickly and easily turn on this functionality. Doing this is much straightforward and comfortable. This task follows a simple process in which you will need to follow some steps. To enable the touch screen feature in Windows 10 or Windows 8, you will need to access the Device Manager on your laptop. You can go through the following option in the “Control Panel”. Or you can open it directly from the Search box on your taskbar. Let’s show you the complete process in detail. Here’s how this method works:

Enabling the Touch Screen on Windows 10

Here are the steps to enable the touch screen mode on Windows 10 laptop:

• Start with the procedure by clicking on the Search Box that you can see on your taskbar.
• Now, in the search box, type the term “Device Manager” and hit enter.
• And now, click on the option of “Device Manager”.
• On the next screen, now you will need to click on the arrow given next to “Human Interface Devices”.
• And then, you will have to click on the option of “HID-compliant touch screen”.
• At the top of your window, you can see an “Action” tab. Click on it and then select the option of “Enable Device”.
• And that’s all. Now verify that the feature is enabled on your laptop.

This is how you can enable the touch screen mode on your Windows 10 laptop. And now, if you want to disable it, you can do it this way:

Disabling the Touch Screen Mode on Windows 10

To disable the touch screen mode on Windows 10, follow the below-mentioned steps:

• Firstly, use the key combination that is “Windows + X” keys to open up the Quick Link menu.
• And now, select and click on the “Device Manager” to open it.
• After reaching the Device Manager window, you will have to click on the little arrow that you will see next to the “Human Interface Devices” option. This will expand the menu.
• Now, right-click on the “HID-compliant touch screen” option and select the option of “Disable Device”.
• After this, a pop-up box will appear on your screen asking if you are sure to disable the feature. Here, click on “Yes” to complete the procedure.

And now, the touch screen mode will be immediately disabled on your laptop.

So, this way, you can enable and disable the touch screen mode on your Windows 10 laptop. However, there are other ways as well to disable the feature. But this is the easiest way. You can also try these procedures if your laptop supports this functionality. And with this, I hope you will find this article helpful. And that’s it for now. Please stay connected with us and visit our website to stay updated.

Source:-  Enable the Touch Screen in Windows 10

 

How to Fix 100% CPU Usage in Windows 10

It is horrifying to turn on a PC only to face severe slowdown and loud-running fans. On facing this, mostly everyone turns to press Ctrl + Shift + Escape, and comes across with another scary information that your CPU usage is at 100%! Well, worry no more. As one, this is a common problem that is not difficult to solve. And two, this article is all you need to fix 100% CPU usage Windows 10. 

Check Your Power Supply

A faulty power supply can lead to undervolting. Wherein, your CPU starts preserving power and functions only at a fraction of its full power. This results in manifesting 100% CPU usage on Windows 10.

This problem is quite easy to solve on a laptop. All you have to do is, unplug your laptop from the power cable, then navigate to the battery icon at the bottom right corner of your Windows 10 desktop. Clicking on the battery icon will direct you to the Battery Settings. In the list of options that appear, select Power & Sleep Settings, then Additional power settings followed by High Performance. This should bring your CPU usage back to normal. You can also check the CPU usage in the task manager by pressing Ctrl + Shift + Esc altogether. In case your desktop is facing the same problem, it might be more complicated to fix because this time, you will need to physically remove the PSU from your PC and test a different one.

Disable Superfetch (or Windows Search)

Superfetch is a constant background process that observes which apps you use the most and pre-fetches them for you so they load quicker. Generally, Superfetch doesn’t cause any problems with Windows, but sometimes it acts rude with older devices.

You can check if it’s Superfetch that is hogging your CPU by navigating to the Task Manager and clicking “More details” followed by “CPU.” In the screen that appears, check if Superfetch or any other service is using a lot of CPU. If you do find something like that,   right-click on it followed by “End Process.”

Reset Your Power Plan

Experimental tweaks in Windows’ power options can severely affect your PC performance with an overloaded CPU usage. To check if all the power options are set to where they should be, navigate to the Start search bar. Then type “power plan” and click on the option named “Choose a power plan.” On the page that appears, check if you are on “High performance” or “Power Saver.” If yes, then switch to “Balanced.”

Disable Third-Party Antivirus Software

Although it doesn’t hurt to add an extra layer of security with antivirus software. But Windows 10s on-board security software, Windows Defender is more than enough to keep your PC safe from virus attacks. Third-party antivirus software on Windows 10 will do nothing but put unnecessary strain on your CPU.

So, even if you are not sure about Windows Defender, consider disabling your third-party antivirus software just to check if it helps your CPU usage or not. If it does, then you know that it is this added antivirus software that is causing troubles. Then you might as well want to uninstall it, considering Windows Defender has got you covered.

Hope this article proved to be helpful.

Source:-  How to Fix 100% CPU Usage in Windows 10

 

Guide to Set Up Your Xbox One Controller with Windows 10 PC

Microsoft’s Xbox One controller is one of their most sought-after products. It is an excellent controller that will enhance your gaming session experiences. It makes it easy to play and brings fantastic controls on your fingertips. You can connect the controller with cables or use it wirelessly on your Windows PC. These controllers have long-lasting batteries that are better than any other gaming console’s controller. It offers less latency during heavy fighting games. But connecting them can seem like a task, especially if you’re new into the gaming world. To help you out, we have mentioned all the different ways that you can use to connect your Xbox One controller to your PC and steps to configure it:

Ways to Connect the Controller

There are various ways you can use to connect the Xbox One controller with your PC, but it mainly depends if you want to use cable or go wireless. Following are the methods you can use:

Use a USB Cable

Your controller comes with a micro-USB cable so that you can create a wired connection. Start by plugging the USB cable into your computer and plug the other end into the front of your controller. The connection will be established, and charging will instantly begin. Remember that you’ll have to do this every time you need to charge your controller. 

Use a Wireless Adapter

This method will help you connect the controller wirelessly, but before that, you’ll need an Xbox One Wireless Adapter for Windows 10. You might find this adapter in the package of your controller. If not, you can purchase it separately. Note that this is different from the adapter for the Xbox 360 controller. 

After purchasing the Wireless Adapter, plug it into a USB port on your computer. You may need to use the USB extender (included in the package) depending on how far the port is at the back of your computer. Then, hold the Xbox button on your controller to turn it on, and press the button on the adapter. Now, press the bind button on your controller. The LED on your controller will start blinking. In the meantime, it will begin searching for a connection and will stop flashing once the connection gets established.

Use Bluetooth

This method is for those who have Bluetooth support on their Xbox One controller. To check if your controller has Bluetooth support, check the surrounding of the Xbox logo on the controller. If it is similar to the plastic as the controller, i.e., without seams, then it supports Bluetooth. If you find a separation between the face of the controller and the logo, then it doesn’t support Bluetooth. Here are the steps to pair your devices together:

1. Go to the Settings of your PC and click on Devices.
2. Select Bluetooth & other devices, and switch on the toggle for Bluetooth so that it can search for available devices.
3. Now, click on Add Bluetooth or Other Device and select Bluetooth.
4. Press the Xbox logo on your controller to turn it on, and press the bind button located at the top.
5. The Xbox Wireless Controller will appear on your device listing. 
6. Click on Pair to establish a connection.

Xbox Controller Management and Configuration

Before going any further, you must download the Xbox Accessories app from the Microsoft Store to get the most out of your controller. Following are the list of things you can do on the app to manage and configure your controller:

Update Your Xbox Controller

By default, Windows 10 comes with the relevant drivers for the Xbox One controller. It helps to update your controller and get all the benefits from the latest firmware. If you experience any issue with your controller, then you should try updating it using the following steps:

1. Open the Xbox Accessories app and connect your controller with it.
2. Now, click on the three horizontal dots icon and select the Firmware version. Then click on Update now.

Test the Buttons on Your Controller

If you are doubtful of the buttons on your controller being registered or not, then try testing them with the Xbox Accessories app. Start by clicking on the Beaker icon. Now you can press the buttons, pull the triggers, and move the sticks on the controller. If the controller works fine, then you’ll see a corresponding icon appearing next to ‘Button Pressed.’ If not, then your controller might be faulty.

Steps to Successful Calibration

Your controller will come calibrated in the package, but you can use the Windows calibration tool to adjust or check its responsiveness. Use the following steps carefully:

1. Open the Start menu, search for ‘joy.cpl,’ and select the Control panel item result. 
2. The Game Controller window will open. Now, select your controller from the list and click on Properties.
3. The Test tab will be open from where you can determine the location of your resting thumbstick on the axis.
4. If you’re not satisfied, switch to the Settings tab and click on Calibrate. Follow the instructions carefully to calibrate the controller.
5. You can reset everything to the original state by clicking on ‘Reset to Default’ from the Settings tab.

This guide will help you use your Xbox One controller without any issue. If these don’t help or your controller fails to respond, then get it checked from an expert.

Source:-  Set Up Your Xbox with Windows 10 PC

 

Here’s How You Can Schedule a Scan in Microsoft Defender Antivirus on Windows 10

The Microsoft Defender Antivirus scans your computer system regularly to make it free from malware and viruses. And for the better functioning of all your devices, it is essential to scan them from time to time. Microsoft Defender Antivirus works pretty well to protect your PC from all the viruses. It scans your computer when you are not using it. And if you want, you can also manually scan your computer system. Or you can schedule a scan as per your requirements. Many people do not know how to schedule a scan for their PC. If you are also one of them and want to know how to schedule a scan in Microsoft Defender Antivirus, then you have arrived at the right page. Anyone can easily schedule a scan on their Windows 10 computer. And this article will let you know how to do so.

In the following article, we have mentioned the technique that will help you to schedule a scan in Microsoft Defender Antivirus on your Windows 10 desktop. So, to get to the method, please go through the complete article.

The Method to Schedule a Scan in Microsoft Defender Antivirus on Windows 10

To schedule a Microsoft Defender Antivirus scan on your Windows 10 PC, you will need to follow the procedure that we have mentioned in this article. This task is easy to accomplish and includes some simple steps that you should follow. So, here’s what you need to do to proceed with the method:

• Firstly, open the Run command on your computer by pressing the “Windows + R” keys. In the search box, type “taskschd.msc” and hit the search button to open the Task Scheduler.
• After this, you will have to expand the Task Scheduler Library and then go to Microsoft > Windows folder given in the left pane of the Task Scheduler.
• And now, select the “Windows Defender” folder.
• Next, you need to double click the “Windows Defender Scheduled Scan Task” that you can see in the middle pane of the Task Scheduler.
• Go to the “Triggers” tab and then select the “New” option.
• And now, create a new trigger by selecting the option of “On a Schedule” given in the “Begin the Task” drop-down menu.
• Select the time for the scan as per your preferences and then click on “Ok”. 
• If you want to delete any scheduled task, you can do that by clicking on it and selecting the option of “Delete”.
• And now, select the “Conditions” tab or select the “Power” settings. And finally, complete the task by clicking on the “Ok” option.
• Once you are done with the procedure, close the Task Scheduler window.

So, now, you know how to schedule a scan in Microsoft Defender Antivirus on your Windows 10 computer. Take some time and follow the procedure to ensure the protection of your PC. And visit our website to read more articles like this.

Source:-  Microsoft Defender Antivirus on Windows 10

 

Want to Enable Dark Mode on Your Windows 10 Computer? Here’s How to Do It.

Dark Mode has now become a common feature that you can find in almost all the applications and devices. It is a great feature that helps the users to reduce eye strain, and it also gives a sleek look to your devices. Along with this, it also saves the battery on your devices. In today’s time, we all spend plenty of our time using our devices for different purposes. And somehow, it affects our health badly and especially our eyes. So, in this case, it becomes quite essential to enable the Dark Mode on our devices. Enabling this feature on smartphones follows a different procedure as compared to doing it on the computer systems. And not all operating systems support this functionality. But, if you use the Windows 10 operating system on your computer, then luckily, you can activate this feature.

Windows 10 has always been one of the most popular and commonly used operating systems among its users. The main reason for its popularity is the features that it provides to its users. And if you are also one of its users and are here to know the procedures for enabling the dark theme on your Windows 10 computer, then luckily, you are on the right spot now. Here, in our following article, we have mentioned the techniques that you will need to follow to enable the feature. So, to know more in this regard, please keep reading the article.

Enabling the Dark Mode on Windows 10 Computer

There are a lot of Windows 10 users who do not know the methods to enable the Dark Mode on their computer. The Dark Mode is a setting that turns the bright white screen of your device a little dark so that it’s easier to work with them. When you enable this setting, most of the apps and features on your device will have a white text with a black or grey background. Activating this feature on your Windows 10 computer is not any complicated task to accomplish. It follows a much easier way to do so. To provide you with a better understanding of the method, we have mentioned the procedure step-by-step. And to enable the Dark Mode theme on your Windows 10 computer system, you must go through the following steps. The whole process will not take much of your time.

So, if you want to enable this setting on your Windows 10 computer, please take a look at the below-mentioned steps:

Steps to Turn on the Dark Mode on Windows 10

Here are the steps to enable the Dark Mode on Windows 10 computer:

• To start enabling the setting, first of all, you will need to click on the “Start” button on your computer. And then select the option of “Settings”.
• On the Settings screen, select the “Personalisation” option.
• Now, go to the left pane and click on “Colours”. Here, you will find two Dark Mode settings to enable. You can choose any of them as per your choice.
• After reaching the “Choose your default app mode” section, you will need to select the option of “Dark”. After this, the Dark Mode will be enabled for many basic settings.
• And now, go to “Choose your default app mode” screen and click on “Dark”. This will automatically activate the Dark Mode in many apps.

Steps to Turn on the Dark Mode for any Specific App on Windows 10 Computer

If you have turned on the Dark Mode on your computer, but find that some apps don’t turn dark, then you can enable the setting for any specific app. Here’s how this works:

• For instance, if you want to turn on the Dark Mode in Microsoft Office apps, open any app like Word, Excel, or Powerpoint.
• And then, go to the “File” tab and click on “Options”.
• There, in the “General” tab, click on the section “Personalise your copy of Microsoft Office”.
• Go to the drop-down menu and select the “Office Theme” option.
• After this, you will be provided with two options, including “Dark Grey” and “Black”. Click on any of the options.
• Save the settings by clicking on the option of “Ok”. And that’s all.

So, this way, you can activate the Dark Mode on your Windows 10 computer. Take some time and try these procedures to personalize your experience. And to stay updated, please visit our website.

Source:- Enable Dark Mode on Your Windows 10

 

Tips to Secure your Windows 10

Keeping your Windows operating system safe from hackers and online attacks is a crucial step in protecting your data on your PC. There are different ways to secure your Windows without spending any money.

In this article, we will mention some beneficial tips for Windows users to secure their system:

Stay up-to-date

We often ignore the pop-up notification to update our system. But the outdated system creates a threat of various online attacks and transmission of viruses and malware into our system. Whenever you update your Windows, Microsoft automatically fixes the security loopholes in your operating system. Updated Windows also strengthens the defense mechanism of your operating system to protect itself from online attacks. You can easily update your system by clicking on the “Start” button and then open the “Settings.” Then click on “Windows Update” and then tap on “Check for Updates.” Another way of updating your system is by pressing the Windows key+1 and then click on “Update & Security.”

Set a strong password for your PC

Your system’s security is not limited to the internet only; you also need to secure your system offline. Your system comes in contact with various public networks which makes your data vulnerable to risks like data theft and misuse of your data. Even if your PC gets stolen, you are putting your data at high risk.

To avoid this kind of mishappenings, you should secure your PC with a strong password. You can set a password in Windows 10 by clicking on” Start” and then tap on “Settings.” Then, go to “Sign-in” options and set a strong password in the appeared window. You can set other security measures like a physical security key, a PIN, your fingerprint, facial recognition, and more.

Check the administrator account on your PC

The administrator account holder can make various changes in your PC without any consent from other users. The owner of the PC should only access the administrator account. You can check which account is linked to your computer by clicking on the “Start” button and then click on “Settings.” In the newly appeared window, check the “Family & other users” option and it will show you other users who can access your computer. Make sure the administrator account only belongs to you.

Regular updating of computer programs

An updated operating system is not the only step to block any online threats. Keeping your other programs updated also plays a vital role in securing your Windows. Some programs are capable of updating itself automatically, but other programs need your attention from time to time. If you have downloaded applications from Microsoft Store, then open the Microsoft Store and click on the three dots on the upper right corner and then click on “Downloads and updates”. If you have downloaded any other than Microsoft programs, then you can visit their website regularly to check for the latest updates.

Delete applications that you don’t use

There are tons of applications available that can help you to perform various functions. Because of this abundant availability, our system is often filled with useless programs and applications that we don’t use. Removing these programs makes your system more secure, and it enhances the performance of your system at the same time. To uninstall unwanted files, you can use the uninstaller on Windows 10. Go to the “Settings” and tap on the “Apps” option. Then, a window will appear with all your programs and applications installed on your PC. Select the unwanted apps and click on “Uninstall.” You can also use various software to get rid of unwanted applications and programs.

Go for a good antivirus software

Windows 10 already has in-built antivirus software, but it only offers basic protection from online threats. Many Microsoft users don’t install efficient antivirus software in their system, which makes them an easy target for online attacks. By installing good antivirus software in your PC, you are adding an extra layer of security from potential hackers. There is various antivirus software available that protects your system without affecting its performance.

Keep your firewall always on

Your computer’s firewall is the primary protection that protects you from online attacks. Make sure your firewall is always on with Windows Defender. To check your firewall, go to the “Settings” and then tap on “Update & Settings” and then click on “Windows Security.” Then check the green checkmark against the “Firewall & network protection” option. Another option to check your firewall is by clicking on “Control Panel” and then tap on “Windows Defender Firewall.”

Use a paid VPN service

If you frequently use public Wi-Fi networks, then your data might be at risk of online theft. Without a VPN, your data is prone to encryption and can be misused by any malicious user. To protect yourself from such online threats, make sure you invest in a paid VPN service. Free VPN services are not very effective in protecting your data as they sell your data to third parties to earn money.

Encrypt your files

In case your system gets stolen, and your important files are not encrypted, then those files can be misused in different ways. Windows 10 comes with a “BitLocker” which is fully capable of encrypting your in-built or portable drives. To set up “Bitlocker”, go to “Control Panel” and then tap on “System and Security”, then select the “BitLocker Drive Encryption” and follow the rest of the instructions.

Conclusion

Setting computer security is crucial to safeguard our data. We often don’t pay attention to our computer’s security until a problem arises, and sometimes it becomes too late because the online attack has already caused great harm to our system. The tips, as mentioned above, are straightforward to follow and do not consume your time. You can follow these tips to strengthen your system against potential online attacks and viruses. 

Source:-  Tips to Secure your Windows 10